USB Type-C 10Gbps M.2 SSD Enclosure M Key, USB 3.1 to PCI-E NVMe Hard Disk Case Aluminum Design Support 2230 2242 2260 2280 Support Samsung SM951/ SM961 (902 AToC, Charcoal Gray) by Rongdeson

Price: Click Button for Price
Product prices and availability are accurate as of 2019-06-25 01:27:15 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

NVMe SSD shop are happy to offer the excellent USB Type-C 10Gbps M.2 SSD Enclosure M Key, USB 3.1 to PCI-E NVMe Hard Disk Case Aluminum Design Support 2230 2242 2260 2280 Support Samsung SM951/ SM961 (902 AToC, Charcoal Gray).

With so many available recently, it is wise to have a make you can recognise. The USB Type-C 10Gbps M.2 SSD Enclosure M Key, USB 3.1 to PCI-E NVMe Hard Disk Case Aluminum Design Support 2230 2242 2260 2280 Support Samsung SM951/ SM961 (902 AToC, Charcoal Gray) is certainly that and will be a excellent purchase.

For this great price, the USB Type-C 10Gbps M.2 SSD Enclosure M Key, USB 3.1 to PCI-E NVMe Hard Disk Case Aluminum Design Support 2230 2242 2260 2280 Support Samsung SM951/ SM961 (902 AToC, Charcoal Gray) comes widely recommended and is a regular choice with lots of people. Rongdeson have provided some excellent touches and this means good value for money.

Manufacturer Description

This product is suitable for M.2 SSDs with PCI-E (M-KEY) interface type. The PCI-E interface implements the NVMe protocol standard. Currently, all products on the market only support PCI-E M.2 hard disk, M.2 hard disk that does not support SATA protocol, this product adopts Type-C interface, aluminum alloy shell design, surface shell with trunking design and two side ventilation holes design, both beautiful and enhanced heat dissipation effect, no need drive, hot swappable, and strong compatibility.
Product Accessories List:
NVMe Enclosure X 1pcs
Type-A To Type-C Cable X 1pcs
Thermal Silica Film X 1pcs
Anti-slip Gasket X 1pcs
Phillips Screwdriver X 1pcs
Instructions X 1pcs
Product Installation Diagram:
1. Prepare the accessories before installation: Hardware aluminum housing (Figure: chassis with silicone gasket), bottom shell PCB board, NVMe SSD hard disk (face paste good silica gel sheet), screwdriver, bottom shell screws.
2. Insert the prepared SSD hard disk (must be PCIE) according to the direction regulation on the PCB board.
3. Buckle the golden copper pillars at the end of the SSD hard disk, and gently press the hard disk until the copper pillar chassis and the corresponding PCB copper holes coincide with each other.
4. Press the copper post and turn it over the back of the PCB board to lock the set screw.
5. Put the PCB board with SSD hard disk reversal into the case. Note: The Type-C connector must be installed in place.
6. After the PCB board is in place, fix the board with two screws on the locking plate. 7. The direction of the bottom shell cover (for the sake of beauty, the bottom of the product we use a lock design, just insert the bottom cover fastened, don't need screw to lock).
8. Press the bottom shell to be flat and lock the two screws at the front.

Product Features

USB 3.1 Port support the speed of data transmission up to 10Gbps,give you a steady and efficient data transfer. Downwards compatible with USB3.0. Easy Setup, Hot-swappable, Plug and Play, No Driver required. With LED indicator, easy to control SSD working status. A several-times increase in performance can significantly reduce latency. Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961. Does not read WD Black. Aluminum alloy sandblasted shell, comfortable and beautiful. Professional Aluminum Case; Ultra slim design for a modern look. Portable yet durable, ideal for traveling. Vents Design for Heat Dissipation; Greatly reduce power consumption, large heat dissipation area and heat dissipation stronger. Provides heat dissipation and data saver for your systems. The Type-C interface supports positive and negative insertion. There is no directional requirement, which improves the ease of plugging and unplugging the USB interface and provides a better user experience. Only for M-Key M.2 SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based), applicable to size 2230 / 2242 / 2260 / 2280.

Write a Review